From: Jason1 (jason1@xxxxxxxxxx)
Date: Fri Apr 06 2001 - 12:57:36 GMT-3
I have never had any problem with clockrate on 4000.. I think you are
wrong.. ;-)
----- Original Message -----
From: "Daniel C. Young" <danyoung99@mediaone.net>
To: "'Tariq Sharif'" <tariq_sharif@btinternet.com>; <adiment@uswest.com>;
<ccielab@groupstudy.com>
Sent: Friday, April 06, 2001 1:44 PM
Subject: RE: Cisco 4500 15 pin Serial Interface
> If you connect it, instead, to a 2500, then you can configure clock rate
on
> the 2500. The 4500, for some reason, just won't seem to take the clock
rate
> command. This has been my experience.
>
> Please correct me if you know otherwise.
>
> Daniel Young
> Sr. Network Engineer
> Internet Data Center
> SBC Service Inc. - ITO
>
> (949) 221-1928 Office
> (714) 350-8945 Cell
> ICQ# 109846891
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Tariq Sharif
> Sent: Friday, March 23, 2001 6:57 AM
> To: adiment@uswest.com; ccielab@groupstudy.com
> Subject: RE: Cisco 4500 15 pin Serial Interface
>
>
> Both ends of the cable are reported to be DTEs. I have a # of DCE to DTE
> cables but they are all DB60 (both ends). I've got 2 cables that are DB15
to
> DB 60 but both ends are DTE to DTE. If I buy a connector box (cheap
options)
> I need to cross some pins.
>
> Does anyone know the pins that need to be crossed?
>
> Many thanks & regards.
>
> Tariq Sharif
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> adiment@uswest.com
> Sent: 15 March 2001 17:19
> To: ccielab@groupstudy.com
> Subject: RE: Cisco 4500 15 pin Serial Interface
>
>
>
> Do a "show controller" for the DB60 serial interface and make sure it's a
> DCE cable.
>
> -----Original Message-----
> From: Tariq Sharif [mailto:tariq_sharif@btinternet.com]
> Sent: Thursday, March 15, 2001 11:13 AM
> To: Ccielab@Groupstudy. Com
> Subject: Cisco 4500 15 pin Serial Interface
>
>
> Has anyone used Cisco 4500 15 pin Serial Interface. I'm connecting it to
> another 4500 which has DB60 serial connection. The cable shows 15 pin to
be
> DTE but clockate command at DB60 doesn't appear in config. Any ideas?
>
> Many thanks & regards.
>
> Tariq Sharif
> LAB SWAP Message board on groupstudy.com.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3