From: Frank Leung (liangfrank@xxxxxxxxxxx)
Date: Thu Apr 05 2001 - 02:24:16 GMT-3
You will not see any NX routes on R2 because it runs eigrp only. Howevery,
you may see 22 and 24 on R6 as NX routes.
>From: "BUI, TIN T (SBCSI)" <tb4565@sbc.com>
>Reply-To: "BUI, TIN T (SBCSI)" <tb4565@sbc.com>
>To: ccielab@groupstudy.com
>Subject: NLSP and EIGRP
>Date: Wed, 4 Apr 2001 14:40:31 -0700
>
>Hi, I have configured all routers to run IPX over EIGRP except for R5 & R6
>which is running NLSP. On R5, I see the following when doing show ipx
>route:
>E 22 [2297856/0] via 100.0002.0002.0002, age 00:43:06,
> 1u, Se0.23
>E 24 [2681856/0] via 100.0002.0002.0002, age 00:43:06,
> 3u, Se0.23
>N 66 [25][01/01] via 666.0000.0000.0001, 355s, Se1
>
>Where ipx 66 is on R6. Now R2 is downstream from R5 running only IPX over
>EIGRP. Why is it that I see this on R2 when doing Show ipx route:
>
>C 22 (SAP), Vi0
>C 24 (HDLC), Se0/1
>E 66 [268416000/2] via 100.0005.0005.0005, age 00:11:32,
> 11u, Se0/0
>
>I would expect that network 66 would be advertised via NX (NLSP), but it's
>being advertised by EIGRP instead. Does anyone know why? thanks
>
>PS I did use redistribution both ways NLSP -> EIGRP and vice versa.
>
> > Tin T. Bui
> > Senior Network Manager
> > CCNP, CNE, MCP
> > Network Management Center
> > SBC Services Inc.
> > 7337 Trade Street, Rm 1110
> > San Diego, Ca 92121
> > Office #: 858-886-4644/858-886-4589
> > Pager #: 858-494-0482
> > Fax #: 858-549-4103
> > Email: tb4565@sbc.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3