From: xander (xander@xxxxxx)
Date: Thu Apr 05 2001 - 10:55:51 GMT-3
Hello TIN,
What exectly are you doing? CCIEBOOTCAMP Lab? What number?
Please submit your configs, but BTW, you don't need to mutual
redistributing between NLSP and IPX EIGRP and back. Each part of
network must consists only ONE routing protocol for IPX, otherwise you
will be in some troubles.
BTTS> Hi, I have configured all routers to run IPX over EIGRP except for R5 & R
6
BTTS> which is running NLSP. On R5, I see the following when doing show ipx
BTTS> route:
BTTS> E 22 [2297856/0] via 100.0002.0002.0002, age 00:43:06,
BTTS> 1u, Se0.23
BTTS> E 24 [2681856/0] via 100.0002.0002.0002, age 00:43:06,
BTTS> 3u, Se0.23
BTTS> N 66 [25][01/01] via 666.0000.0000.0001, 355s, Se1
BTTS> Where ipx 66 is on R6. Now R2 is downstream from R5 running only IPX ove
r
BTTS> EIGRP. Why is it that I see this on R2 when doing Show ipx route:
BTTS> C 22 (SAP), Vi0
BTTS> C 24 (HDLC), Se0/1
BTTS> E 66 [268416000/2] via 100.0005.0005.0005, age 00:11:32,
BTTS> 11u, Se0/0
BTTS> I would expect that network 66 would be advertised via NX (NLSP), but it'
s
BTTS> being advertised by EIGRP instead. Does anyone know why? thanks
BTTS> PS I did use redistribution both ways NLSP -> EIGRP and vice versa.
>> Tin T. Bui
>> Senior Network Manager
>> CCNP, CNE, MCP
>> Network Management Center
>> SBC Services Inc.
>> 7337 Trade Street, Rm 1110
>> San Diego, Ca 92121
>> Office #: 858-886-4644/858-886-4589
>> Pager #: 858-494-0482
>> Fax #: 858-549-4103
>> Email: tb4565@sbc.com
-- WBW, xander mailto:xander@adt.ru CCNA, CCNP+VoiceAccess, CCIE very soon :-)...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3