From: Frank Leung (liangfrank@xxxxxxxxxxx)
Date: Thu Apr 05 2001 - 01:54:37 GMT-3
I can get ipx snapshot working on Ccbootcamp#7 without those lists. Marc's
solution use them as well.
Frank
>From: Devender Singh <devender.singh@cmc.cwo.net.au>
>Reply-To: Devender Singh <devender.singh@cmc.cwo.net.au>
>To: Jiang <jianggx@transcentury.com.cn>, CCIELAB <ccielab@groupstudy.com>
>Subject: RE: Does I really need these commands in the config of IPX Snapsh
>ot routing??
>Date: Thu, 5 Apr 2001 13:08:08 +1000
>
>I agree with you. I seen this kind of configs at other places on CCO as
>well.
>
>Devender Singh
>BE(Hons), CCNP
>IP Solution Specialist
>
>
>-----Original Message-----
>From: Jiang [mailto:jianggx@transcentury.com.cn]
>Sent: Sunday, 25 March 2001 11:19
>To: CCIELAB
>Subject: Does I really need these commands in the config of IPX Snapshot
>routing??
>
>
>Hello, all,
>
>In CCO "http://www.cisco.com/warp/customer/129/21.html",I think there
>are some mistakes in the configuration. the dialer-list is the
>following:
>access-list 901 deny 0 FFFFFFFF 0 FFFFFFFF 457
>access-list 901 deny 1 10.0000.0000.0001 0 10.ffff.ffff.ffff 453
>access-list 901 deny 4 10.0000.0000.0001 0 10.ffff.ffff.ffff 452
>access-list 901 deny 4 FFFFFFFF 0 FFFFFFFF 456
>access-list 901 permit 0
>access-list 901 permit 1
>access-list 901 permit 4
>access-list 901 permit 5
>access-list 901 permit 17
>access-list 901 permit 20
>
>I think they shouldn't deny sap and rip(453 and 452), because one
>role of snapshot is handling such thing, they can't trigger the
>call even you don't deny them. I tested it in my lab, just deny 457, the
>routers worked well. Although the config of the cco can also work, but
>I think there shouldn't be added. The questions is if you understand
>the concept of snapshot routing. Before I read this config, I think
>I understand sanpshot very well, but this config really make me
>puzzled.
>
>Do you think my understanding of snapshot routing is right or not? If
>I am wrong, pls correct me.
>
>Another question, what is sap 456, should I deny it or not?
>
>
>Best regards,
>Guoxing Jiang mailto:jianggx@transcentury.com.cn
>
>
>**NOTE** All LAB SWAP messages should now be sent to the
>LAB SWAP Message board on groupstudy.com.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3