From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Wed Apr 04 2001 - 18:49:15 GMT-3
Below is what I ended up doing and it works. The cost value had to be 4.
thanks for all you solutions.
> Try
> router rip
> Offset-list 11 out 5 e 0
> Access-list 11 permit x.x.x.x
> I believe this will do it. You may have to change the cost value to 4. I
> can't remember if the receiving router adds one.
>
>
> James D. Merrill
> Systems Engineer
> SBC DataComm
>
>
>
> -----Original Message-----
> From: sanjay [mailto:ccienxtyear@hotmail.com]
> Sent: Wednesday, April 04, 2001 4:00 PM
> To: ccielab@groupstudy.com
> Subject: RIP Question
>
> I have 2 routers connected back-to-back via ethernet. They
> are both running
> RIP v1. R1 has a loopback interface also. The lab I am
> working on is asking me
> to configure R2 so that it sees the loopback with a hop
> count of 5. I just
> can't seem to find any information on how to do this ??. Any
> ideas.
>
> thanks,
> Sanjay
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3