From: Mike Gutknecht (mgutknec@xxxxxxxxx)
Date: Wed Apr 04 2001 - 03:01:41 GMT-3
I don't see why a call isn't made. Start debugging.
debug snapshot
debug dialer packet
debug dialer activity
debug ip packet
Also, show isdn status to insure that layers 1 and 2 are up.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
garry baker
Sent: Monday, April 02, 2001 3:18 PM
To: ccielab@groupstudy.com
Subject: snapshot routing ????????
Guys,
I need some help, this is about to do my head in. I
have gone through the archives and Caslow's book but I
am still unable to get snapshot working. Snapshot goes
active but no call is made. I have gone from 12 code
back to 11-2 but still no joy. Could you have a look
at my configs and point out my blunder?
Garry
interface BRI0
ip address 172.16.1.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer map snapshot 1 32161820
dialer map ip 172.16.1.2 broadcast 32161820
dialer-group 1
isdn switch-type basic-ts013
snapshot client 5 8 suppress-statechange-update
!
interface Switch0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no fair-queue
!
router rip
network 172.16.0.0
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
interface BRI0
ip address 172.16.1.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer map ip 172.16.1.1 broadcast 32161905
dialer-group 1
isdn switch-type basic-ts013
snapshot server 5 dialer
!
interface Switch0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no fair-queue
!
router rip
network 172.16.0.0
network 200.10.10.0
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3