From: Pickell, Aaryn (Aaryn.Pickell@xxxxxxxxxxxxx)
Date: Wed Apr 04 2001 - 02:07:29 GMT-3
There was a bug filed to fix that. It's for using a /31 address, not a /32.
It's fairly new, but has been added to the 12.0 S train, and the 12.1 E
train.
If you want to use /32, then you can unnumber the serial to a loopback with
a /32.
Aaryn Pickell - CCNP, CCDP, MCSE
Senior Engineer - Routing Protocols
Getronics Inc.
Direct: 713-394-1609
Email:aaryn.pickell@getronics.com
> -----Original Message-----
> From: Curtis Call [mailto:curtiscall@home.com]
> Sent: Tuesday, April 03, 2001 9:25 PM
> To: ccielab@groupstudy.com
> Subject: Cisco support for /32 p-to-p links
>
>
> Anyone know if Cisco supports /32 point to point links and if so the
> commands necessary to do it? I work with Junipers at my job,
> which do
> support this, and I'd like to connect the two via SONET with
> only a /32
> used but I'm having trouble figuring out how to do it on the
> Cisco side. I
> think this is somewhat of a new development so they might not
> support it
> yet, but I thought I'd ask.
>
> Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3