From: Michel GASPARD (mgaspard@xxxxxxxxx)
Date: Tue Apr 03 2001 - 18:54:09 GMT-3
Yes, and even a sub-chapter on redistribution between ISIS and RIP (page
730+), but does not show any "sh ip ro" on the RIP side, and my config
seems similar to the RIP one (for the redistribution part).
By the way, I found out that chapter the most disappointing one of the
book, so I was looking for a better description of ISIS ...
Any other idea?
Thank you very much anyway.
Regards,
Michel
fwells12 wrote:
>
> Hey Mike, Doyle has a 100 page chapter on IS-IS that might be worth a look.
>
> ----- Original Message -----
> From: Michel GASPARD <mgaspard@cisco.com>
> Cc: Ccielab@Groupstudy. Com <ccielab@groupstudy.com>
> Sent: Tuesday, April 03, 2001 1:57 PM
> Subject: ISIS: redistribution into OSPF
>
> > Group,
> >
> > I am not very familiar with ISIS, and hit an issue I cannot solve
> > (yet..)
> >
> > I have the following setup:
> >
> > R2- -R5
> > & & & &
> > & ==R3=== &
> > & & & &
> > R1-- -R4
> >
> > (4 serial connections on R3, one to each other router).
> >
> > R1, R2 and R3 are running ISIS (basic config), seeing each other
> >
> > R3, R4 and R5 are running OSPF (basic config), seeing each other
> >
> > All links are HDLC serials.
> >
> > I am re-distributing both ways.
> >
> > OSPF to ISIS is OK, and I can see all and every subnets in R1 and R2 =>
> > OK
> >
> > ISIS to OSPF is only showing the Lo0 interfaces of R1 and R2, and the
> > network between R1 and R2, but NOT the two networks R1-R3 and R2-R3.
> >
> > Then routes are in the isis database, but are not redistributed into
> > OSPF.
> >
> >
> > Any idea how I can progress?
> >
> > Any good description of ISIS (is there any Hassam Halabi for ISIS ;-)) ?
> >
> > Thank you in advance,
> >
> > Michel
> >
> >
> >
> >
> > R3#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 4500 Software (C4500-JS-M), Version 12.0(11), RELEASE SOFTWARE
> > (fc1)
> >
> > !
> > router ospf 1
> > redistribute isis area1 level-1-2 subnets
> > network 154.10.3.3 0.0.0.0 area 0
> > network 154.10.20.0 0.0.0.3 area 0
> > network 154.10.20.4 0.0.0.3 area 0
> > !
> > router isis area1
> > redistribute ospf 1 metric 11 metric-type external level-2
> > net 00.0000.0000.0003.00
> > !
> >
> >
> >
> > R3#sh isis dat det
> > IS-IS Level-1 Link State Database
> > LSPID LSP Seq Num LSP Checksum LSP Holdtime
> > ATT/P/OL
> > 0000.0000.0001.00-00 0x0000000F 0xC8FB 720 0/0/0
> > Area Address: 00
> > NLPID: 0xCC
> > IP Address: 154.10.1.1
> > Metric: 10 IP 154.10.1.0 255.255.255.0
> > Metric: 10 IP 154.10.10.0 255.255.255.252 <<<< this network is NOT
> > redistributed
> > Metric: 10 IP 154.10.10.4 255.255.255.252 <<< this network IS
> > redistributed...
> > Metric: 10 IS 0000.0000.0001.01
> > Metric: 10 IS 0000.0000.0002.00
> > Metric: 10 IS 0000.0000.0003.00
> > Metric: 0 ES 0000.0000.0001
> > .....
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3