RE: OSPF On Demand Circuit & RIP redistrubition

From: Oscar Diaz Poveda (Oscar.Diaz@xxxxxxxxx)
Date: Tue Apr 03 2001 - 15:56:16 GMT-3

   
Thanks Marc for your answer. If I follow your advise, I cann4t know the RIP
routes in the OSPF domain and this is the main objetive. Any other idea?

Thanks.

Oscar.

-----Mensaje original-----
De: Marc Russell [mailto:mrussell@ccbootcamp.com]
Enviado el: Tuesday, April 03, 2001 8:43 PM
Para: 'Oscar Diaz Poveda'; ccielab@groupstudy.com
Asunto: RE: OSPF On Demand Circuit & RIP redistrubition

Just filter the RIP routes into OSPF that define the ISDN link.

Marc Russell
CCIE Boot Camp
www.ccbootcamp.com

-----Original Message-----
From: Oscar Diaz Poveda [mailto:Oscar.Diaz@azlan.com]
Sent: Tuesday, April 03, 2001 2:17 PM
To: ccielab@groupstudy.com
Subject: OSPF On Demand Circuit & RIP redistrubition

        Dear all,

I have the following scenario:
                
                
ISDN ----- Router 1 (OSPF On Demand Circuit, RIP and redistribution
between
them) ---- Ethernet ------ Router 2 (only RIP)

OSPF----------------------------------------|--------------------------- 

----
------------RIP

The problem is the following:

When I configure OSPF On Demand Circuit in Router 1, the Hellos are
supressed correctly but the ISDN link is always up (flapping). It goes
down
when the idle-timeout expires and go up inmediatly ??? The only way to
"solve" the problem and keep the ISDN line down is disable the
redistribution of RIP into OSPF.

Do you know why? What can be the problem? How can I solve it and keep
the
line down while redistribution is maintained?

Thank you very much in advance.

        Best regards,

Oscar.

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3