From: Michael E. Flannagan (mflannag@xxxxxxxxx)
Date: Tue Apr 03 2001 - 15:45:44 GMT-3
http://www.cisco.com/warp/public/112/chapter17.htm
Before a call can be placed, a modem must be allocated for the call. To
view this process, and the subsequent call, use the following debug
commands:
debug modem
debug modem csm
debug cas
Note: The debug cas command first appeared in IOS version 12.0(7)T for
the AS5200 and AS5300. Earlier versions of IOS use a system-level
configuration command service internal along with the exec command
modem-mgmt debug rbs:
Turning on the Debugs
router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#service internal
router(config)#^Z
router#modem-mgmt csm ?
debug-rbs enable rbs debugging
no-debug-rbs disable rbs debugging
router#modem-mgmt csm debug-rbs
router#
neat msg at slot 0: debug-rbs is on
neat msg at slot 0: special debug-rbs is on
---------------------------------------------------------
C i s c o S y s t e m s Michael E. Flannagan
| | Network Consulting Engineer
||| ||| Research Triangle Park, NC
||||||| ||||||| (919) 392-4550
.:|||||||||||:.:|||||||||||:. mflannag@cisco.com
---------------------------------------------------------
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Lee R. Riviere
> Sent: Tuesday, April 03, 2001 1:53 PM
> To: ccielab@groupstudy.com
> Subject: Service internal
>
>
> Does anyone know what the command "service internal" does? I
> have checked CCO
> and it is undocumented, I know the default is no service
> internal, and I had
> a problem with a router that had it enabled. Any help would
> be appreciated.
>
> On another note I am going to brazil for my next attempt on
> the lab, can
> anyone tell me what it's like in Brazil that has already been there.
>
> Thanks,
> Lee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3