From: Vijay Venkatesh (vijay.venkatesh@xxxxxxx)
Date: Sun Mar 04 2001 - 18:39:00 GMT-3
Don't forget - IOS versions and features and MAC addresses, type of
router etc.
Vijay
Sandy Turnage wrote:
>
> that you have during the troubleshooting section is your lab diagram. So it
> would seem very important to record *everything* possible on your network
> diagram. The obvious things are ip addresses, AS numbers, Area numbers,
> interface types (DTE/DCE), non-default timer settings, switch port numbers,
> SPIDs. What other information should I add to my drawing? Would recording
> the Mac addresses of the first LAN inteface of each router be helpful? What
> about writing down the number of routes in the routing table of each
> router? What about MAC addresses for DLSW icanreach entries? Can you have
> an additional sheet of information (say an IP address matrix) that is
> seperate from your diagram? Or does everything have to go on one sheet?
>
> Thanks,
> Sandy Turnage
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:20 GMT-3