From: Troy Edington (TEdington@xxxxxxxxxxxxx)
Date: Sun Mar 04 2001 - 02:31:38 GMT-3
Can you post your relevant configs
Troy
-----Original Message-----
From: Steven Weber [mailto:itweber@earthlink.net]
Sent: Saturday, March 03, 2001 9:20 PM
To: CCIE GROUP
Subject: isdn floating statics...(ccbootcamp lab #5a)
Can somebody please explain to me why I can only get the ping to work when
I set up a floating static in one direction at a time. I shut the frame
switch
on one side and tried a ping and it worked, the ISDN line came up. When I
went
to the other side to try it it didn't work so I figured that either I
configured
it wrong or it sees the frame switch so maybe it was spoofing it or
something. I
went to the frame switch shut down the other end and it still didn't work.I
then
opened up both ports on the frame switch to make sure the other side can
ping
and that worked as well, went back to the frame-switch and shut down the
other
side and it was able to ping using the ISDN line. I went back to the first
side
again and it was giving me the same problems I had in the first place. I
hope I
explained well. I don't understand why this isn't working. Can somebody
please
explain.
Thanks
--- Steven Weber
--- EarthLink: It's your Internet.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:19 GMT-3