isdn floating statics...(ccbootcamp lab #5a)

From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Sun Mar 04 2001 - 02:19:47 GMT-3

   

Can somebody please explain to me why I can only get the ping to work when
I set up a floating static in one direction at a time. I shut the frame switch
on one side and tried a ping and it worked, the ISDN line came up. When I went
to the other side to try it it didn't work so I figured that either I configure
d
it wrong or it sees the frame switch so maybe it was spoofing it or something.
I
went to the frame switch shut down the other end and it still didn't work.I the
n
opened up both ports on the frame switch to make sure the other side can ping
and that worked as well, went back to the frame-switch and shut down the other
side and it was able to ping using the ISDN line. I went back to the first side

again and it was giving me the same problems I had in the first place. I hope I

explained well. I don't understand why this isn't working. Can somebody please
explain.

Thanks

--- Steven Weber

--- itweber@earthlink.net

--- EarthLink: It's your Internet.

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:19 GMT-3