From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Sat Mar 03 2001 - 17:26:35 GMT-3
I think you would want to look at the command snmp-server view. You may
also need to use access-list and different community strings depending on
the access requirements of other snmp managers.
HTH
Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "ke Hei" <heike9@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 03, 2001 12:25 PM
Subject: SNMP issue
> Hi, currently I am working on an testing lab
> environmnet. There is a SUN station running SNMP mgt.
> program and connecting to a midsize network w/ 10
> routers as following:
> [ SUN ]------|_____ethennet---|
> |
> |_e0:Rx:e1--|
> |
> Ethennet --------------------
> | | | |
> e0 e0 e0 e0
> R1 R2 R3 R4
>
> All routers running SNMP.
>
> How to JUST config. routers to prevent SUN to poll ARP
> table?
>
> I looked over all cisco CD doc. and couldn't find any
> related SNMP commands to solve this issue.
> Is there any undoc. cisco commands that can be used ?
>
> I guess this is related to kind of MIB or UDP.
>
> Putting an access-list on Rx:e0 (out) to filter out
> all
> Mac info. of routers within network -- might be a way
> or not ?
>
> Please correct me and thanks in advance.
>
>
> HK
> Sat.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:19 GMT-3