From: Stanford Wong - Personal Account (wongfu@xxxxxxxxx)
Date: Fri Mar 02 2001 - 21:20:17 GMT-3
What type of serial cable are you using? looks like you may have a clockrate
that is too fast for the serial cable.
Try a clockrate of 125000.
stanford
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Joseph Thelander
Sent: Friday, March 02, 2001 1:26 PM
To: ccielab@groupstudy.com
Subject: NLSP question
I'm trying to get a *VERY* simple IPX NLSP config working. It's
practically straight out
of the book, but it's not coming up. The weird symptom is that the line
protocol
keeps flapping. Here's the error messages:
0:18:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
statn
r3#
00:18:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
statp
r3#
R6 & R3 are attached back-to-back with a serial cable.
Here are the configs:
r6#wr t
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r6
!
enable password cisco
!
ip subnet-zero
no ip domain-lookup
ipx routing 0006.0006.0006
ipx internal-network 666
!
!
!
interface Loopback0
no ip address
no ip directed-broadcast
ipx network 66
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Ethernet1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
no ip address
no ip directed-broadcast
no ip mroute-cache
ipx ipxwan 0 unnumbered r3
ipx nlsp foo enable
no fair-queue
clockrate 4000000
!
interface Serial1
no ip address
no ip directed-broadcast
!
ip classless
!
!
!
!
ipx router nlsp foo
area-address 0 0
!
!
!
r3#wr t
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r3
!
enable password cisco
!
ip subnet-zero
no ip domain-lookup
ipx routing 0003.0003.0003
ipx internal-network 333
!
!
!
interface Loopback0
no ip address
no ip directed-broadcast
ipx network 33
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
shutdown
frame-relay lmi-type ansi
!
interface Serial1
no ip address
no ip directed-broadcast
ipx ipxwan 0 unnumbered r3
ipx nlsp foo enable
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
interface Dialer1
no ip address
no ip directed-broadcast
no cdp enable
!
ip classless
!
!
!
!
ipx router nlsp foo
area-address 0 0
!
!
!
!
line con 0
exec-timeout 0 0
privilege level 15
password cisco
logging synchronous
login
transport input none
line aux 0
exec-timeout 0 0
password cisco
login
line vty 0 4
exec-timeout 0 0
password cisco
login
!
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:18 GMT-3