From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Fri Mar 02 2001 - 17:50:56 GMT-3
Check out table two in the following link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/260
0/rn2600xq.htm
This release supports the 1FE Network Module in the 2600.
-----Original Message-----
From: Christopher M. Heffner [mailto:cheffner@certified-labs.net]
Sent: Friday, March 02, 2001 1:44 PM
To: Bownds, Clayton; Jason1; ccielab@groupstudy.com
Subject: RE: FW: 2613....
According to the HW-SW Matrix and all product documenation that I can
find - the Fast-Ethernet module is NOT support in any of the 2600 series
routers. It is support in the 3600 series routers only. At least
currently ...
2600 series will support either the NM-1E or NM-4E only in slot 1.
HTH,
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, MCT, MCNI, CLI, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: Bownds, Clayton [mailto:Clayton.Bownds@getronics.com]
Sent: Friday, March 02, 2001 3:18 PM
To: 'Jason1'; Bownds, Clayton; ccielab@groupstudy.com
Subject: RE: FW: 2613....
you're right and I think I wasn't clear before... *in reference to your
question*, the only 2600's that support FastEthernet are 2620, 21, 50,
and
51... you can put a NM-1FE in any 2600, but you can't trunk or
channel...
actually, someone speak up if you know otherwise, but I think the fact
that
normal traffic can be passed on a NM-1FE in a 261x router in the series
is
not actually supposed to work. Check it out:
http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
(requires CCO login)
-c
-----Original Message-----
From: Jason1 [mailto:jason1@v-labs.net]
Sent: Friday, March 02, 2001 1:58 PM
To: Bownds, Clayton; ccielab@groupstudy.com
Subject: Re: FW: 2613....
No.. These comes with BUILT-IN FastE, but 261x also supports FastE..
Only
prob is that I don't think it supports ISL , not even with FastE...
Of course.. I may be wrong and that some new IOS updates fixed that...
etc...
----- Original Message -----
From: "Bownds, Clayton" <Clayton.Bownds@getronics.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 03, 2001 3:43 AM
Subject: FW: FW: 2613....
> .
>
> -C
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
Of
> > Steven Weber
> > Sent: Wednesday, February 28, 2001 5:01 PM
> > To: CCIE GROUP
> > Subject: 2613....
> >
> >
> >
> > can I put a nm-1fe into a 2613 to do trunking?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:18 GMT-3