From: Stanford Wong - Personal Account (wongfu@xxxxxxxxx)
Date: Wed Feb 28 2001 - 15:21:56 GMT-3
do a "show line" from there you will be able to see the TTY port number.
Then just add 2000 and then you get your reverse telnet port number.
stanford
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Steven Weber
Sent: Wednesday, February 28, 2001 7:00 AM
To: Norberto Padin; ccielab@groupstudy.com; Yi Fang
Subject: Re: AUX port used to connect consoles
what TCP port do you use in the host table?
----- Original Message -----
From: Yi
Fang
To: ccielab@groupstudy.com ;Norberto Padin
Sent: 2/28/01 12:51:10 PM
Subject: Re: AUX port used to connect
consoles
1, setup aux port like access server async port.
2, in most cases, use rollover cable from aux to con.
3, depending router type of r1, r2, r3, map the correct reverse telnet
port.
Yi Fang
----- Original Message -----
From: "Norberto Padin" npadin@cisco.com
Sent: Wednesday, February 28, 2001 2:58 PM
Subject: AUX port used to connect consoles
Hello group.
Since I'm running out of access server console ports, I'd like to use
AUXs
ports to concentrate CON ports from other routers.
Does anybody know how can achieve this?
____
#1_______ [CON R1_____AUX R1]________[CON R4]
Access Server /_____#2_______ [CON R2_____AUX R2]________[CON
R5]
\_____#3_______ [CON R3_____AUX R3]________[CON R6]
TIA.
Nor.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:09 GMT-3