From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Mon Feb 26 2001 - 21:33:22 GMT-3
Loopback 0 on R$ should be in area3.
----- Original Message -----
From: Steven Weber <itweber@earthlink.net>
To: CCIE GROUP <ccielab@groupstudy.com>
Sent: Monday, February 26, 2001 4:00 PM
Subject: ccbootcamp lab #4
>
> section 3 task 1 point 1: I've done update-source lo0 on both r3 and
> r4 and have added the ebgp-multihop 2 command. However the lo0 on r3 is
not in
> the totally stubby area that r3 and r4 share so r4 will never see the
route, so
> I tried adding in a default route but that didn't help either, so I tried
adding
> the network statement in bgp and that didn't help either. On r4 the lo0
was not
> part of any routing protocol but I did the same thing on r4 that I did on
r3 and
> nothing worked. There is now no ebgp connection between r3 and r4. Should
I
> add lo0 to ospf on r4 so r3 can learn it like that? How will r4 learn lo0
from
> r3?
>
> Thanks Guys,
>
>
>
> --- Steven Weber
>
> --- itweber@earthlink.net
>
> --- EarthLink: It's your Internet.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:04 GMT-3