From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 21:03:38 GMT-3
section 3 task 1 point 1: I've done update-source lo0 on both r3 and
r4 and have added the ebgp-multihop 2 command. However the lo0 on r3 is not in
the totally stubby area that r3 and r4 share so r4 will never see the route, so
I tried adding in a default route but that didn't help either, so I tried addin
g
the network statement in bgp and that didn't help either. On r4 the lo0 was not
part of any routing protocol but I did the same thing on r4 that I did on r3 an
d
nothing worked. There is now no ebgp connection between r3 and r4. Should I
add lo0 to ospf on r4 so r3 can learn it like that? How will r4 learn lo0 from
r3?
Thanks Guys,
--- Steven Weber
--- EarthLink: It's your Internet.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:04 GMT-3