From: Rodgers Moore (rodgers@xxxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 19:25:20 GMT-3
You do have a problem. The only thing I can think of is for you to
steal the nvram from a good 2501 with a working AUX config and put it
into the non-working router. It's been so long since I've looked into a
2501, I can't remember if this is possible.
So, the questions now are: is the nvram soldered in or socketed? Do you
have another 2501?
The next option is component level repair of the console port. ie.
replace the UART chip & check continuity of the solder joints.
Another thought, sometime the pins on an RJ port get bent up or sideways
and don't make a connection. Have you checked the console for bent
pins?
Rodgers Moore
MASK wrote:
> hi,
>
> I've a router (2501), whose Console port is faulty,
> and its AUX port has an unknown password set onto it,
> and to make the matter worse its all interfaces are
> shut down, so we cant even telnet to it!!
>
> anyone has got any clue??? how can i make this router
> usable?
>
> i know many gr8 minds are on this list!!
>
> thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:04 GMT-3