From: frank wells (fwells12@xxxxxxxxxxx)
Date: Mon Feb 26 2001 - 19:17:37 GMT-3
My bad. Try taking the flash out and putting it in another 2500 series
router. Perform previous instructions on it then transfer it back to the
original router with a working aux port. The startup config is saved on the
flash (nvram) I believe, so you may find this will work.
>From: MASK <afaqk@rocketmail.com>
>Reply-To: MASK <afaqk@rocketmail.com>
>To: frank wells <fwells12@hotmail.com>, ccielab@groupstudy.com
>Subject: Re: challenge q
>Date: Mon, 26 Feb 2001 13:06:57 -0800 (PST)
>
>hi,
>
>i cant go to the ROMMON mode, cause it doesn't allow
>to break(ctl-brk) via AUX port, only via CON port.
>
>i think my router has "no enable password" and/or "no
>enable secret", thats why when i log-in via AUX, and
>type "en", it says "%No Password Set".
>
>bbye
>
>--- frank wells <fwells12@hotmail.com> wrote:
> > Reboot the router and get to ROMMON. Change the
> > config register to 0x2142.
> > Reload the router, it will boot normally but it will
> > not start the startup
> > script. Log on as normal. Go to 'line aux 0' and
> > type in 'transport input
> > all', 'modem inout', 'login' and password xxxx' Once
> > you have done that,
> > change the config register back to 0x2102 and reboot
> > it again. Make sure
> > you have are plugged into the aux port with your
> > terminal emulation program.
> > You will now have access to the router just like
> > over the console port.
> >
> >
> >
> >
> > >From: MASK <afaqk@rocketmail.com>
> > >Reply-To: MASK <afaqk@rocketmail.com>
> > >To: ccielab@groupstudy.com
> > >Subject: challenge q
> > >Date: Mon, 26 Feb 2001 12:25:45 -0800 (PST)
> > >
> > >hi,
> > >
> > >I've a router (2501), whose Console port is faulty,
> > >and its AUX port has an unknown password set onto
> > it,
> > >and to make the matter worse its all interfaces are
> > >shut down, so we cant even telnet to it!!
> > >
> > >anyone has got any clue??? how can i make this
> > router
> > >usable?
> > >
> > >i know many gr8 minds are on this list!!
> > >
> > >thanks
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:03 GMT-3