From: Ron (ron@xxxxxxxxxxxxxxxxxxxx)
Date: Sun Feb 25 2001 - 22:43:43 GMT-3
Hi, all,
Besides tcp 2065 and tcp 2067, Is there any more ports for dlsw+ =
traffic? I checked Cisco CD and got no answer. Before I put the =
access-list 120 in the R2. The dlsw+ is working. If I put the =
access-list, the dlsw+ peers are lost.
Here is a scenario: R1 (fa0/0) .........(e0, access-list 120 in ) R2 =
(s1)...........(s1)R3
Required: only permit dlsw+ traffic pass through R2
My configs:
*************
R1:
dlsw local-peer peer-id 138.10.4.1
dlsw remote-peer 0 fst 138.10.25.3=20
dlsw bridge-group 1
R2:
interface e0
ip access-group 120 in
access-list 120 permit tcp any any eq 2065
access-list 120 permit tcp any any eq 2067
R3:
dlsw local-peer peer-id 138.10.25.3
dlsw remote-peer 0 fst 138.10.4.1
dlsw bridge-group 1
r1#sh dlsw peers
Peers: state pkts_rx pkts_tx type drops ckts TCP =
uptime
FST 138.10.25.3 DISCONN 0 0 conf 0 - - =
-
Expected: 0 Next Send: 0 Seq errors: 0
Total number of connected peers: 0
Total number of connections: 0
********************
Thanks for any help,
Ron
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:01 GMT-3