From: Peter (peter@xxxxxxxxx)
Date: Sat Feb 24 2001 - 14:40:10 GMT-3
For configuring CLIP, PVCs, SVCs, etc check out
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_c
/wcatm.htm
The NSAP prefix is provided by the ATM switch. Once you configure the ilmi
pvc, do a ''sho atm ilmi' and you will see the NSAP address. You can make
up your own esi address. (credit goes to Simon Baxter for guiding me to
this)
Have fun,
Peter
----- Original Message -----
From: "David FAHED" <dfahed@outremer.com>
To: "Peter" <peter@web53.com>
Sent: Saturday, February 24, 2001 9:49 AM
Subject: Re: Basic Config LS1010
> Thanks Peter!
> It will help me a lot and what for classical arp ?
>
> Peter wrote:
>
> > For SVCs, you have to do nothing on the 1010. For PVCs, you map a PVC
from
> > interface to interface just like frame relay PVCs on a router.
> >
> > For example (I am doing this from memory so the syntax may be a little
off)
> >
> > interface ATM 0/0/0
> > atm pvc 100/100 interface ATM 0/0/1
> >
> > You only define the PVC on one ATM interface, you can try to add pvc to
the
> > other interface but the 1010 will say that it already exists.
> >
> > hth
> >
> > Peter
> >
> > ----- Original Message -----
> > From: "David Fahed" <dfahed@ais.gp>
> > Cc: <ccielab@groupstudy.com>
> > Sent: Saturday, February 24, 2001 7:48 AM
> > Subject: Basic Config LS1010
> >
> > > I'm scheduled Sunday and Monday in the rack1 of ccbootcamp. I only
want to
> > > practice ATM and switch 3920. I'm looking for a config for LS1010 that
> > allow me
> > > to practice (PVC, SVC, classic arp).
> > > Could some one send me some basic config for the LS1010?
> > >
> > > Thanks in advance.
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:59 GMT-3