From: Peter (peter@xxxxxxxxx)
Date: Sun Feb 25 2001 - 00:13:02 GMT-3
David,
Nothing else to do on a Saturday night so I fired up the old LS1010.
Here is the correct syntax for creating a pvc on the ATM switch:
!
interface ATM12/0/3
atm pvc 101 101 interface ATM12/0/0 101 101
!
Peter
----- Original Message -----
From: "Peter" <peter@web53.com>
To: "David FAHED" <dfahed@outremer.com>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, February 24, 2001 11:40 AM
Subject: Re: Basic Config LS1010
> For configuring CLIP, PVCs, SVCs, etc check out
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_c
> /wcatm.htm
>
> The NSAP prefix is provided by the ATM switch. Once you configure the
ilmi
> pvc, do a ''sho atm ilmi' and you will see the NSAP address. You can make
> up your own esi address. (credit goes to Simon Baxter for guiding me to
> this)
>
> Have fun,
> Peter
>
> ----- Original Message -----
> From: "David FAHED" <dfahed@outremer.com>
> To: "Peter" <peter@web53.com>
> Sent: Saturday, February 24, 2001 9:49 AM
> Subject: Re: Basic Config LS1010
>
>
> > Thanks Peter!
> > It will help me a lot and what for classical arp ?
> >
> > Peter wrote:
> >
> > > For SVCs, you have to do nothing on the 1010. For PVCs, you map a PVC
> from
> > > interface to interface just like frame relay PVCs on a router.
> > >
> > > For example (I am doing this from memory so the syntax may be a little
> off)
> > >
> > > interface ATM 0/0/0
> > > atm pvc 100/100 interface ATM 0/0/1
> > >
> > > You only define the PVC on one ATM interface, you can try to add pvc
to
> the
> > > other interface but the 1010 will say that it already exists.
> > >
> > > hth
> > >
> > > Peter
> > >
> > > ----- Original Message -----
> > > From: "David Fahed" <dfahed@ais.gp>
> > > Cc: <ccielab@groupstudy.com>
> > > Sent: Saturday, February 24, 2001 7:48 AM
> > > Subject: Basic Config LS1010
> > >
> > > > I'm scheduled Sunday and Monday in the rack1 of ccbootcamp. I only
> want to
> > > > practice ATM and switch 3920. I'm looking for a config for LS1010
that
> > > allow me
> > > > to practice (PVC, SVC, classic arp).
> > > > Could some one send me some basic config for the LS1010?
> > > >
> > > > Thanks in advance.
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:00 GMT-3