From: NoOne Important (lm_nguyen@xxxxxxxxxxx)
Date: Fri Feb 23 2001 - 16:10:11 GMT-3
Funky command! Create bogus arp in the arp table using ethernet interface
mac address....I wonder what happen if you do this and then assign a host in
the ethernet that ip address? conflict of address?
COMMSERVER#show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 65.195.195.193 2 0000.c575.4c34 ARPA Ethernet0/0
COMMSERVER(config)#ip alias ?
A.B.C.D IP address to alias to a port
COMMSERVER(config)#ip alias 65.195.195.201 2037
Invalid IP address
COMMSERVER(config)#
*Mar 3 23:15:26.324 EST: IP ARP: creating incomplete entry for IP address:
65.195.195.201 interface Ethernet0/0
Internet 65.195.195.194 0 0010.5a01.7a50 ARPA Ethernet0/0
Internet 65.195.195.201 0 0010.5ae1.12fe ARPA Ethernet0/0
Internet 65.195.195.202 2 0090.27e5.a444 ARPA Ethernet0/0
Internet 65.195.195.205 - 0001.96ef.efc0 ARPA Ethernet0/0
Internet 65.195.195.204 - 0001.96ef.efc0 ARPA Ethernet0/0
Internet 65.195.195.206 - 0001.96ef.efc0 ARPA Ethernet0/0
COMMSERVER#
COMMSERVER#ping 65.195.195.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 65.195.195.205, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
COMMSERVER#telnet 65.195.195.205
Trying 65.195.195.205 ... Open
COMMSERVER line 35
RTC-2600#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:59 GMT-3