From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Thu Feb 22 2001 - 22:01:44 GMT-3
Something to consider - sometimes the bootcamp suggested answers are not
exactly correct.
Something else to consider - sometimes there are other ways that might work.
In general, one cannot reach an unknown network unless there is a default
network in the routing table. I recall posts on this group about things like
IRDP, but have not been successful in figuring how this allows one to
accomplish tasks such as you describe.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Bob
Chahal
Sent: Thursday, February 22, 2001 3:40 PM
To: Johnny Dedon; Groupstudy
Subject: Re: bootcamp la5 again
I'm working on this Lab right now and I have the same problem. By the way
when you say router 4 I think you mean router 5?
Anway does anyone have an answer to this?
Thanks
Bob
----- Original Message -----
From: "Johnny Dedon" <johnny.dedon@exodus.net>
To: "Groupstudy" <ccielab@groupstudy.com>
Sent: Thursday, February 22, 2001 11:27 PM
Subject: bootcamp la5 again
> Guys,
> I've asked Mark this question and have not gotten an answer that works for
> me. Router 2 has a loopback on it addressed 200.200.200.1/24.
> This loopback is not advertised by any routing protocol or by redistribute
> connected command.
> How can it be reached from router3? Mark says through the default route
> injected into ospf with the always keyword. The default route injected is
> from the 137.20.20.0/24 network according to the answer configs. Since
> router4 is also connected to this network and router 3 reaches the default
> network through router 4, how does router 3 ever reach 200.200.200.1 which
I
> see as reachable from router 2, router 1, and router 7 only.
>
> Johnny Dedon
> Senior Staff Consultant
> Exodus Professional Services
> johnny.dedon@exodus.net
> www.exodus.net
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:57 GMT-3