From: Piperw222@xxxxxxx
Date: Wed Feb 21 2001 - 22:51:19 GMT-3
Can someone please tell me whether the clock speeds on the switch have to
match with the low speed and high speed interface - when you have dlci's
mapped to between high speed and low speed int The problem that I am having
is that the high speed interface allow you to use 115200 but the low speed
int don't have a matching speed -- so I would have to configure them both
with 64000. What I really want to know is ,if it has to match or not and if
yes what is the best speed to use. I would also like to know if the router
that is connected to the switch has a dce interface and the interface on the
switch is dte what is the best clock speed to use on the router... The norm
is usually 2000000 So again my question is do the speeds have to match... I
am going to be using rack #2 on bootcamp.. If anyone can help me with the
switch configuration for lab 8 I would be greatly appreciated.. I have killed
a lot of time in the past getting frame relay to be stable...
Thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:56 GMT-3