From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Feb 20 2001 - 16:00:37 GMT-3
You can't with old IOS since the network command in RIGRP process is
classful only. With new IOS the network command can take subnet mask too and
that's how you control which interfaces participate in EIGRP process.
Regards,
Sam Munzani
CCIE # 6479, CCNP, CCDP, MCSE, CNE 5, SCO Master ACE, HP Openview Consultant
> Thanks for the help guys. But, I guess I should have mentioned that I
> already have passive-interfaces defined, and that still does not help. I
> thought that 'distriblute-list x out conneected' would have done it, but
> that didn't help either.
>
> Cory
>
>
> -----Original Message-----
> From: Amyn Naran [mailto:amyn_naran@yahoo.com]
> Sent: Tuesday, February 20, 2001 12:14 PM
> To: Pablo Thoma; Hebert, Cory J (cory.hebert@wcom.com)
> Subject: Re: how do I stop connected routes from being injected?
>
>
>
> remember the intent of the passive intf - to NOT advertise but listen.
>
> --- Pablo Thoma <pthoma@employees.org> wrote:
> > try
> >
> > passive-interface
> >
> > for those that you wish not to be included.
> >
> > Cheers,
> >
> > Pablo
> >
> > "Hebert, Cory J (cory.hebert@wcom.com)" wrote:
> >
> > > Hi all,
> > >
> > > I have simple question for you guys. I have a router running
> > eigrp, and all
> > > interfaces on the router have subnets of the same major classful
> > network.
> > > Well, obviously, I put the classful network statement under eigrp.
> > Well, as
> > > soon as eigrp sees that it has an interface belonging to the same
> > classful
> > > network defined under the eigrp process, it injects the connected
> > route into
> > > the process.
> > >
> > > I've tried 'no redistribute connected', 'distribute-list x out
> > connected',
> > > nothing works. Can someone help me to stop this connected route
> > from being
> > > injected into eigrp, so that the downstream router doesn't learn
> > it?
> > >
> > > Thanks!
> > >
> > > Cory
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3