From: Randy Feliz (rjfeliz@xxxxxxxxx)
Date: Wed Feb 21 2001 - 04:23:44 GMT-3
When You configure the CiscoSecure server NT version...there is an option
that lets you check the NT userdata base for authentication...the way that
it works is that it will look first in the CiscoSecure database..if the user
is not found then it will check the NT userdatabase
Randy Feliz
Senior Network Engineer
CCIE# 4331(R/S, ISP Dial)
----- Original Message -----
From: Michael Le <mmle@sprintparanet.com>
To: 'Himawan Nugroho' <hnugroho@jakarta.omnes.slb.com>;
<ccielab@groupstudy.com>
Sent: Tuesday, February 20, 2001 8:32 PM
Subject: RE: authentication using NT account (off topic?)
> I don't think that is possible. But you can tell the AS5300 to connect to
a
> Radius/TACACS+ server and have that authenticate off of NT. So you
> essentially achieve the same result.
>
> Michael
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Himawan Nugroho
> Sent: Tuesday, February 20, 2001 9:21 PM
> To: ccielab@groupstudy.com
> Subject: authentication using NT account (off topic?)
>
>
> Hi,
> This question has nothing to do with CCIE lab (I guess)
>
> but someone came to my lab yesterday and asked how to use Win NT account
as
> authentication method for his AS5300, and I can't answer that.
> I tried to find out in cisco.com and can't find it. I even open TAC case
for
> this but nobody answer until now.
>
> This guy want his AS5300 connect to Win NT PDC and get authentication from
> the NT account, so his users will use only one account, to connect to AS
and
> to connect to NT network.
> Can this be done?
>
> I feel so dumb, practice all OSPF and BGP theory but I can't even answer
one
> question!
>
> rgds,
> Himawan Nugroho
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3