From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Tue Feb 20 2001 - 11:50:56 GMT-3
Anyone,
This is kind of OT, so please reply off line. I'm in the process of
converting a site from (point to point SDLC) to (DLSW over frame)between an
AS/400 and an IBM 5394 controller. The 5394s are PU 2.1. The AS/400 also
has ethernet connectivity. I'm clear on the DLSW portion, but shaky on the
SDLC portion. Does anyone have any info or advise on configuring the remote
router to talk SDLC to the controller? Would I need to change the
controller's configuration? The XID, VMAC, and SDLC partner parameters are
what I'm confused about. I've seen the Cisco example
http://www.cisco.com/warp/public/488/39.html , but I've been unable to get
the SDLC line to come up. The diagram looks like this:
current
----------
dedicated circuit
AS400 async port
----------------------------------------------------------------------------
---5394 async port
proposed
-----------
DLSW over frame
AS400 ethernet -----1720
router---------------------------------------------------1720 router
-------5394 async port
Thanks in advance,
Chuck Church
CCNP, CCDP, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000 x218
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:53 GMT-3