From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Mon Feb 19 2001 - 18:31:59 GMT-3
ensure you are using a : when referring to your flash...
e.g. on a 36xx with 2 PCMCIA flash cards, if you do a cd slot0 you get an
error "Read only ...." but if you do a cd slot0: works fine.
Regards,
Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
-----Original Message-----
From: Scott Schneidewind [mailto:schneids@ispchannel.com]
Sent: Tuesday, 20 February 2001 10:19 a.m.
To: ccielab@groupstudy.com
Subject: Changing flash from "Read only"
Hello all.
I have some 2501 routers which each have two 8Mb sticks of flash ram in
them.
"Show Flash" lets me know that one is read/write and the other is read only.
How can I change the read only partition...so it can be erased and combined
with the other one.
-Scott
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:53 GMT-3