From: NoOne Important (lm_nguyen@xxxxxxxxxxx)
Date: Mon Feb 19 2001 - 01:36:35 GMT-3
<html><DIV>
<P><BR><BR></P></DIV>
<P>should use serial interface as tunnel source.</P>
<P> </P>
<P>>From: "Jim Schrader" <JSCHRAD1@TAMPABAY.RR.COM></P>
<DIV></DIV>>Reply-To: "Jim Schrader" <JSCHRAD1@TAMPABAY.RR.COM>
<DIV></DIV>>To: <CCIELAB@GROUPSTUDY.COM>
<DIV></DIV>>Subject: IP GRE Tunnel Example
<DIV></DIV>>Date: Sun, 18 Feb 2001 23:02:46 -0500
<DIV></DIV>>
<DIV></DIV>>I am attempting to tunnel and connect the two 10.x.x.x networks
across the
<DIV></DIV>>172.16.0.0 network. This appears simple but it is not working (p
ossibly I
<DIV></DIV>>should go to bed). I am routing only the 172.60.0.0 net using RI
P and
<DIV></DIV>>attempting to route the 10.x.x.x net with EIGRP. Any tips on why
this is
<DIV></DIV>>not working?
<DIV></DIV>>
<DIV></DIV>>
<DIV></DIV>>
<DIV></DIV>>10.1.1.0 ---(E0) R1 (S0) --- 172..16.0.0 --- (S0) R2 (E0) --- 10
.3.3.0
<DIV></DIV>> |------------- 10.2.2.0 Tunnel -----------|
<DIV></DIV>>
<DIV></DIV>>I am using
<DIV></DIV>>
<DIV></DIV>>R1
<DIV></DIV>>Int Tunnel 0
<DIV></DIV>>Ip addr 10.2.2.1 255.255.255.0
<DIV></DIV>>Tunnel source E0
<DIV></DIV>>Tunnel destination 172.16.1.2
<DIV></DIV>>
<DIV></DIV>>Router Rip
<DIV></DIV>>Network 172.16.0.0
<DIV></DIV>>
<DIV></DIV>>Router Eigrp 1
<DIV></DIV>>Network 10.0.0.0
<DIV></DIV>>No auto
<DIV></DIV>>
<DIV></DIV>>===========================
<DIV></DIV>>
<DIV></DIV>>R2
<DIV></DIV>>Int Tunnel 0
<DIV></DIV>>Ip addr 10.2.2.2 255.255.255.0
<DIV></DIV>>Tunnel source E0
<DIV></DIV>>Tunnel destination 172.16.1.1
<DIV></DIV>>
<DIV></DIV>>Router Rip
<DIV></DIV>>Net 172.16.0.0
<DIV></DIV>>
<DIV></DIV>>Router Eigrp 1
<DIV></DIV>>Network 10.0.0.0
<DIV></DIV>>No auto
<DIV></DIV>>
<DIV></DIV>>
<DIV></DIV>>
<DIV></DIV>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:52 GMT-3