From: Jim Schrader (jschrad1@xxxxxxxxxxxxxxx)
Date: Mon Feb 19 2001 - 01:02:46 GMT-3
I am attempting to tunnel and connect the two 10.x.x.x networks across the
172.16.0.0 network. This appears simple but it is not working (possibly I
should go to bed). I am routing only the 172.60.0.0 net using RIP and
attempting to route the 10.x.x.x net with EIGRP. Any tips on why this is
not working?
10.1.1.0 ---(E0) R1 (S0) --- 172..16.0.0 --- (S0) R2 (E0) --- 10.3.3.0
|------------- 10.2.2.0 Tunnel -----------|
I am using
R1
Int Tunnel 0
Ip addr 10.2.2.1 255.255.255.0
Tunnel source E0
Tunnel destination 172.16.1.2
Router Rip
Network 172.16.0.0
Router Eigrp 1
Network 10.0.0.0
No auto
===========================
R2
Int Tunnel 0
Ip addr 10.2.2.2 255.255.255.0
Tunnel source E0
Tunnel destination 172.16.1.1
Router Rip
Net 172.16.0.0
Router Eigrp 1
Network 10.0.0.0
No auto
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:52 GMT-3