Re: Rip ver2 into ospf

From: Simon Jin (jins@xxxxxxx)
Date: Fri Feb 16 2001 - 14:19:37 GMT-3


   
If you can not see 170.100.42.0/28 from other routers, redistribute connected i
nto ospf on rtr5.

>>> "Dan Skiptunas" <dskiptunas@jannon.com> 02/16/01 01:53AM >>>
To All ,

  I cannot seem to get RIP V2 to redistribute into OSPF I must be missing
something can someone look at the config and see where I have made a
mistake

sho run
Building configuration...

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname rtr5
!
enable password cisco
!
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
ip multicast-routing
ip dvmrp route-limit 20000
ipx routing 0005.0005.0005
!
!
!
!
!
 interface Ethernet0
 ip address 1.1.1.1 255.255.255.0 secondary
 ip address 170.100.42.241 255.255.255.240
 no ip directed-broadcast
 ip nat inside
 ip pim sparse-dense-mode
 ip igmp join-group 239.1.1.1
 ipx network 42
 bridge-group 1
!
interface Serial0
 no ip address
 no ip directed-broadcast
 ip nat outside
 encapsulation frame-relay
 frame-relay lmi-type ansi
!
interface Serial0.1 multipoint
 ip address 170.100.33.1 255.255.255.0
 no ip directed-broadcast
 ip pim sparse-dense-mode
 ip ospf network point-to-multipoint
 ip ospf interface-retry 0
 ipx network 33
 no ipx split-horizon eigrp 1
 frame-relay map ip 170.100.33.2 501 broadcast
 frame-relay map ip 170.100.33.3 503 broadcast
 frame-relay map ipx 33.0002.0002.0002 501 broadcast
 frame-relay map ipx 33.0003.0003.0003 503 broadcast
!
interface Serial0.2 point-to-point
 ip address 170.100.37.1 255.255.255.0
 no ip directed-broadcast
 frame-relay interface-dlci 504
!
interface Serial1
 no ip address
 no ip directed-broadcast
 shutdown
!
interface BRI0
 ip address 170.100.55.1 255.255.255.240
 no ip directed-broadcast
 ipx network 55
!
router ospf 50
 redistribute igrp 1 subnets route-map igrp2ospf
 redistribute rip subnets route-map rip2ospf
 network 170.100.33.0 0.0.0.255 area 0
!
router rip
 version 2
 redistribute ospf 50 metric 2 route-map ospf2rip
 network 170.100.0.0
 no auto-summary
!
router igrp 1
 redistribute ospf 50 route-map ospf2igrp
 network 170.100.0.0
 default-metric 1500 2000 255 1 1500
!
ip nat pool CCIE 170.100.42.242 170.100.42.254 netmask 255.255.255.240
ip nat inside source list 5 pool CCIE overload
ip classless
ip default-network 210.0.5.0
ip pim send-rp-announce Serial0.1 scope 16
ip pim send-rp-discovery scope 16
!
access-list 1 permit 170.100.51.0 0.0.0.255
access-list 1 permit 170.100.200.0 0.0.0.255
access-list 1 permit 170.100.37.0 0.0.0.255
access-list 2 permit 170.100.42.240 0.0.0.15
access-list 2 permit 20.20.20.0 0.0.0.255
access-list 5 permit 1.1.1.0 0.0.0.255
route-map igrp2ospf permit 10
 match ip address 1
!
route-map ospf2igrp deny 10
 match ip address 1
!
route-map ospf2igrp permit 15
 match route-type external
!
route-map ospf2igrp permit 20
!
route-map rip2ospf permit 10
 match ip address 2
!
route-map ospf2rip deny 10
 match ip address 2
!
route-map ospf2rip permit 20
!
!
!
!
ipx router eigrp 1
 network 33
!
!
ipx router rip
 no network 33
!
!
!
bridge 1 protocol ieee
!
line con 0
 transport input none
line aux 0
line vty 0 4
 no login
!
end

rtr5# sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.0(9), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 02:27 by bettyl
Image text-base: 0x03058078, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFTWARE (fc1)

rtr5 uptime is 2 minutes
System restarted by reload
System image file is "flash:c2500-jos56i-l.120-9.bin"

cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 11823836, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

rtr5#sho ip rout
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
       U - per-user static route, o - ODR

Gateway of last resort is not set

     170.100.0.0/16 is variably subnetted, 12 subnets, 3 masks
I 170.100.200.0/24 [100/8576] via 170.100.37.2, 00:00:14, Serial0.2
C 170.100.42.240/28 is directly connected, Ethernet0
O IA 170.100.129.1/32 [110/129] via 170.100.33.3, 00:00:03, Serial0.1
O E2 170.100.150.0/24 [110/20] via 170.100.33.3, 00:00:03, Serial0.1
O IA 170.100.165.0/24 [110/128] via 170.100.33.3, 00:00:03, Serial0.1
O IA 170.100.161.0/24 [110/74] via 170.100.33.3, 00:00:03, Serial0.1
O E2 170.100.97.0/28 [110/20] via 170.100.33.3, 00:00:03, Serial0.1
C 170.100.37.0/24 is directly connected, Serial0.2
O 170.100.33.3/32 [110/64] via 170.100.33.3, 00:00:03, Serial0.1
C 170.100.33.0/24 is directly connected, Serial0.1
C 170.100.55.0/28 is directly connected, BRI0
I 170.100.51.0/24 [100/8976] via 170.100.37.2, 00:00:14, Serial0.2
     1.0.0.0/24 is subnetted, 1 subnets
C 1.1.1.0 is directly connected, Ethernet0
O E2 210.0.5.0/24 [110/20] via 170.100.33.3, 00:00:03, Serial0.1
rtr5#
 Dan Skiptunas
 Network Engineer
 NEC-BNS



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:51 GMT-3