From: zhuqingliu (zql@xxxxxxxxxx)
Date: Thu Feb 15 2001 - 22:21:47 GMT-3
Thanks to all of you!
There two way to change the hello-interval:
1. change ip ospf network type
2. change with the ip ospf hello-interval command
To change the dead-interval:
1. change ip ospf network type
2. change with the ip ospf hello-interval command, the dead-interval will be ch
anged with four times of hello-interval
3. change with the ip ospf dead-interval command
If you change the hello-interval , The dead-interval will be changed automatica
lly. But not vice versa.
Thanks again
Perry
----- Original Message -----
From: Rahmlow, Howard F. <howard.rahmlow@unisys.com>
To: 'Halaska, David' <David.Halaska@getronics.com>; 'zhuqingliu' <zql@liming.co
m>; ccielab <ccielab@groupstudy.com>
Sent: Thursday, February 15, 2001 9:30 PM
Subject: RE: change ospf hello interval w/o ip ospf command
> You can also change the dead time. Play with it on an interface, you will
> see the hello time change also. Then make sure both ends of the link match.
>
> Howard
>
>
> -----Original Message-----
> From: Halaska, David [mailto:David.Halaska@getronics.com]
> Sent: Thursday, February 15, 2001 8:23 AM
> To: 'zhuqingliu'; ccielab
> Subject: RE: change ospf hello interval w/o ip ospf command
>
>
> You could change the ospf network type. Mostly useful in frame-relay. This
> will change the hello and dead timers since the dead timer is 4 times the
> hello timer. Broadcast and point to point will have timers of 10 and 40.
> Non-broadcast will be 30 and 120. You can see this information if you do a
> show ip ospf interface.
> The command to change the network type is and interface command:
> ip ospf network [network type]
>
>
> Hope this helps
> David Halaska
>
> -----Original Message-----
> From: zhuqingliu [mailto:zql@liming.com]
> Sent: Monday, February 12, 2001 7:36 PM
> To: ccielab
> Subject: change ospf hello interval w/o ip ospf command
>
>
> Hi, Group,
>
> I encounter an senario, to change the hello interval without ip ospf
> command.
>
> Best regards
> Perry.Zhu
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:50 GMT-3