From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Mon Feb 12 2001 - 23:28:43 GMT-3
1. OSPF Cost = 100000000/BW (in bps)
2. You get the error because you are entering in a prefix that contains
host bits, the cmd should read:
ip route 173.168.40.0 255.255.255.0 10.20.1.1
Regards,
Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
-----Original Message-----
From: Steven Weber [mailto:itweber@netzero.net]
Sent: Tuesday, 13 February 2001 2:18 p.m.
To: ccielab@groupstudy.com
Subject: ccbotocamp lab #2...
I'm having a few problems: (1) R6 has to be configured so that the
speed on s1 is reflected in the OSPF metric but without using the ip
ospf cost command.I know that this is manipulated by changing the bw on
s1 but how do you know how much to change it in order to reflect the
OSPF metric correctly. (2)They want you to throw a static route on r2 so
that you can ping e0 on r4 but when I enter
ip route 173.168.40.1 255.255.255.0 10.20.1.1 it sends back an error
message
%Inconsistent address and mask, on top of that I can't ping r3 but to me
logically that shouldn't be a problem because they are in different AS's
and r2 is running point-to-point with the hub and r3 is running
multipoint so r1 dooesn't know that it has to map the dlci for it
because it isn't listed under the multipoint int.
Can anyone please give me a hand with these.
Thanks,
Steve
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:46 GMT-3