From: Andrew (arousch@xxxxxxxx)
Date: Sun Feb 11 2001 - 20:26:41 GMT-3
you have to clear the connection at the command line.
At 04:52 PM 2/11/01 -0500, Sam Pilot wrote:
>Hello folks
>
>I have a 2511 terminal server which I am using to reverse telnet into a =
>2501 router. This router has a modem connected to the Aux port.
>
>I have configured the Aux port so that I can reverse telnet into the =
>modem (using the "modem inout" command) so that I can configure it.=20
>
>I am able to get into the modem and use the AT command set.
>
>My question is how to get back out of the modem configuration mode and =
>back to my 2501 router. If I do Ctrl Shift 6 X, I come back to the =
>terminal server prompt.
>
>Any suggestions?
>
>Thanks
>
>Sam
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:45 GMT-3