From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Sun Feb 11 2001 - 12:33:43 GMT-3
IS-IS recognizes only point to point and broadcast networks. On frame
relay, with ISIS you have only a couple of choices:
1) use point to point subinterfaces
2) use the frame-relay map statements
3) set up and use tunnels between the end points
there are no tweaks like the ones you are used to manipulating in OSPF to
fool it into thinking it is something else.
HTH
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kamran Sadiq
Sent: Friday, February 09, 2001 1:20 PM
To: CCIE_Lab Groupstudy List
Subject: ISIS AND framerelay multipoint interfaces
Is there a way to configure ISIS for IP routing over frame-relay =
multipoint interfaces without using
>>>> Frame-relay map clns 'DLCI #' broadcast
Can any one post the configs ?
Thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:45 GMT-3