From: Thomas Trygar (trygar@xxxxxxxx)
Date: Sat Feb 10 2001 - 12:11:18 GMT-3
You must use the RouterID for IP addr. Issue the command 'show ip ospf neighbor
'. This
will tell you the RouterID of your neighbor.
If you have this problem, you should be getting Mismatched Router ID error mess
ages every
minute or so on console screen.
Tom
Bruce Williams wrote:
> A virtual link is created between R3 and R4. The output of "show ip ospf
> virtual-links" shows down on R3, but it is up on R4. Everything still seems
> to work. All of the External routes are being received on R4.
>
> 1. Why does it appear that the virtual-link is up on one side and down on
> the other?
> 2. Is the virtual link necessary? Removing it did not seem to change
> anything.
>
> Bruce Williams
> [mailto:bruce@williamsnetworking.com]
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3