From: Scott King (scking@xxxxxxxxx)
Date: Fri Feb 09 2001 - 22:41:15 GMT-3
Darren,
Not only are the routes from r5 in r3's table, but I can ping anything
on r5 from r3.
No access lists.
Scott
Darren Ward wrote:
>
> Hi Scott,
>
> You mentioned that r5's table shows the routes from IGRP but does the
> OSPF routes show up on r3?
>
> Possible your OSPF to IGRP redistribution is dodgy.
>
> Otherwise do you have any access-lists for any icmp types and try
> setting 'debug ip icmp' both ends and see who see's or send what.
>
> Darren
>
> Scott King wrote:
> >
> > Hey All,
> >
> > Setup is this:
> >
> > r5---fr---r4---hdlc---r1---token---r3
> >
> > Between r5 and r4 is OSPF area 0. Between r4 and r3 (including r1) is
> > IGRP AS 10. Two-way redistribution on r4. Routes attached to r3 show
> > up in r5's table, but I can't ping them.
> >
> > Suggestions?
> > --
> >
> > R. Scott King
> > Network Consulting Engineer
> > Cisco Systems, Inc.
> > Advanced Network Support - SP
> > 9155 E. Nichols Avenue Suite 400
> > Englewood, CO 80112 USA
> > 919.949.8425
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3