From: Darren Ward (dward@xxxxxxxxxx)
Date: Fri Feb 09 2001 - 23:10:02 GMT-3
What does a traceroute from each end look like?
Scott King wrote:
>
> Darren,
>
> Not only are the routes from r5 in r3's table, but I can ping anything
> on r5 from r3.
>
> No access lists.
>
> Scott
>
> Darren Ward wrote:
> >
> > Hi Scott,
> >
> > You mentioned that r5's table shows the routes from IGRP but does the
> > OSPF routes show up on r3?
> >
> > Possible your OSPF to IGRP redistribution is dodgy.
> >
> > Otherwise do you have any access-lists for any icmp types and try
> > setting 'debug ip icmp' both ends and see who see's or send what.
> >
> > Darren
> >
> > Scott King wrote:
> > >
> > > Hey All,
> > >
> > > Setup is this:
> > >
> > > r5---fr---r4---hdlc---r1---token---r3
> > >
> > > Between r5 and r4 is OSPF area 0. Between r4 and r3 (including r1) is
> > > IGRP AS 10. Two-way redistribution on r4. Routes attached to r3 show
> > > up in r5's table, but I can't ping them.
> > >
> > > Suggestions?
> > > --
> > >
> > > R. Scott King
> > > Network Consulting Engineer
> > > Cisco Systems, Inc.
> > > Advanced Network Support - SP
> > > 9155 E. Nichols Avenue Suite 400
> > > Englewood, CO 80112 USA
> > > 919.949.8425
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3