From: Wade Edwards (wade.edwards@xxxxxxxxxxxxxxxxxxx)
Date: Fri Feb 09 2001 - 14:06:24 GMT-3
Balanced uses two BNC connectors to accept the E1 line and unbalanced uses
an RJ-45 connector. Some cards/DSUs have both connectors but some only have
one or the other. You need to make sure if you have one or the other that
the Telco gives you that kind of interface.
My experience is that they don't give you either. They will give you an
X.21 connector that you just connect to your router. Your mileage may vary.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
austin.alao@bt.com
Sent: Friday, February 09, 2001 8:26 AM
To: ccielab@groupstudy.com
Subject: BALANCED/UNBALANCED E1 CARDS - HELP NEEDED!
DOES anyone know the difference between the 2 types of ISDN PRI cards? -
i.e.: balanced/unbalanced?
Please help.
Austin Alao,
01442 431 247 / 07740 148 175
"He Who Brings Sunshine to the Life of Others, Cannot Himself Live in
Darkness"
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:43 GMT-3