From: Troy Rader (troy@xxxxxxxxxx)
Date: Fri Feb 09 2001 - 13:36:18 GMT-3
Hi everyone.
I'm working on fatkid #501. My problem is with the connected network
between R4 and R1. R3 is learning of this network via OSPF, and when I
shutdown the eth0 on R4, R3 is is NOT learning about this same network via
RIP, as I expected. I have redist conn under rip on R4. I tried a static
of this connected network to null0 254 and redist static. I have my
metric 1 set for each redist attempt. I've tried the rip redist conn and
redist static with the metric on that line, and I've put the
default-metric on it's own line. I can see the route appear with OSPF
before I shutdown eth0 on R4 with debug ip routing, and I can see it get
deleted when I shut eth0 on R4. R5 is learning about 192.19.15.0 via RIP,
with R4 eth0 up or down, so I think RIP is working. I am leaning toward
some issue with the classfullness of RIP and the 170.10 network vs 192.19
network, but I don't have any answers.
Any and all comments appreciated.
Troy
ps - I don't know why my email client posts with TO: where my name should
be. I use PINE and Outlook Express and get the same result.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:43 GMT-3