Re: Host Route

From: CCIE yong (ccie_yong@xxxxxxxxxxx)
Date: Wed Feb 07 2001 - 03:13:01 GMT-3


   
Hi,

The command "Area 0 range ...." doesn't seems to get rid of the host route
entries in the routing table, in fact is it OK to leave the host route
inside by the consequences of using the "ip ospf net point-to-multipoint",
will the proctor penalise on this ?

Please advise,

Thanks,
Yonger

----- Original Message -----
From: CCIE yong <ccie_yong@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 04, 2001 11:49 PM
Subject: Host Route

>Hi,
>
>The host route that generated by "ip ospf network point-to-multipoint" in
>Frame relay will be in the routing table, should we summarised them up or
we
>can leave them there, if we need to summarise them , how to do it, I can't
>seems to summarise them successfully.
>
>R10#sh ip ro
>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
>area
> * - candidate default, U - per-user static route, o - ODR
> P - periodic downloaded static route
>
>Gateway of last resort is 150.100.32.2 to network 0.0.0.0
>
> 137.20.0.0/24 is subnetted, 1 subnets
>O IA 137.20.20.0 [110/74] via 150.100.32.2, 00:00:01, Serial0/0
> 172.168.0.0/16 is variably subnetted, 3 subnets, 2 masks
>C 172.168.10.32/27 is directly connected, Ethernet0/0
>O IA 172.168.64.0/18 [110/74] via 150.100.32.4, 00:00:01, Serial0/0
>C 172.168.10.64/27 is directly connected, Loopback0
> 150.100.0.0/16 is variably subnetted, 3 subnets, 2 masks
>O 150.100.32.2/32 [110/64] via 150.100.32.2, 00:00:01, Serial0/0
>C 150.100.32.0/19 is directly connected, Serial0/0
>O 150.100.32.4/32 [110/64] via 150.100.32.4, 00:00:01, Serial0/0
>O*E1 0.0.0.0/0 [110/174] via 150.100.32.2, 00:00:01, Serial0/0
>
>Thanks
>Yong



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3