From: CCIE yong (ccie_yong@xxxxxxxxxxx)
Date: Mon Feb 05 2001 - 04:49:30 GMT-3
Hi,
The host route that generated by "ip ospf network point-to-multipoint" in
Frame relay will be in the routing table, should we summarised them up or we
can leave them there, if we need to summarise them , how to do it, I can't
seems to summarise them successfully.
R10#sh ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 150.100.32.2 to network 0.0.0.0
137.20.0.0/24 is subnetted, 1 subnets
O IA 137.20.20.0 [110/74] via 150.100.32.2, 00:00:01, Serial0/0
172.168.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.168.10.32/27 is directly connected, Ethernet0/0
O IA 172.168.64.0/18 [110/74] via 150.100.32.4, 00:00:01, Serial0/0
C 172.168.10.64/27 is directly connected, Loopback0
150.100.0.0/16 is variably subnetted, 3 subnets, 2 masks
O 150.100.32.2/32 [110/64] via 150.100.32.2, 00:00:01, Serial0/0
C 150.100.32.0/19 is directly connected, Serial0/0
O 150.100.32.4/32 [110/64] via 150.100.32.4, 00:00:01, Serial0/0
O*E1 0.0.0.0/0 [110/174] via 150.100.32.2, 00:00:01, Serial0/0
Thanks
Yong
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:37 GMT-3