From: Lev Terebizh (lter@xxxxxxxxxxxxxxxx)
Date: Tue Feb 06 2001 - 14:46:36 GMT-3
How about to post configs....:-))
----- Original Message -----
From: "Brian Hescock" <bhescock@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 06, 2001 9:38 AM
Subject: token switch 3920 config problems
> Having problems getting two routers to talk using a 3920 switch in the
> middle. Very basic config but it isn't working:
>
> 3920 config
>
> brf 100
> |
> crf 10 (parent is brf 100)
> | |
> port port (ports linked to crf 10)
> 3 4
> | |
> R1 R2
>
> So ports 3 and 4 on the switch are both linked to crf 10, which has a
> parent of brf 100. R1 has an ip address of 10.1.1.1 and R2 and ip
> address of 10.1.1.2, ring speed 16 (that's all). Both are up/up but I'm
> getting encap failed when trying to ping. I wouldn't think I need any
> bridging commands at all on R1 and R2, it should be just like plugging
> into a MAU.
>
> The f'n search engine for the archives isn't working at groupstudy.com
> again, 2nd day in a row (was hoping to find the answer there). Any
> ideas why it wouldn't be working?
>
> Brian
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:39 GMT-3