From: Price, Jamie (JPrice@xxxxxxxxxxx)
Date: Tue Feb 06 2001 - 14:53:56 GMT-3
Brian,
Did you define the ring numbers?
Jamie
-----Original Message-----
From: Brian Hescock
To: ccielab@groupstudy.com
Sent: 2/6/01 11:38 AM
Subject: token switch 3920 config problems
Having problems getting two routers to talk using a 3920 switch in the
middle. Very basic config but it isn't working:
3920 config
brf 100
|
crf 10 (parent is brf 100)
| |
port port (ports linked to crf 10)
3 4
| |
R1 R2
So ports 3 and 4 on the switch are both linked to crf 10, which has a
parent of brf 100. R1 has an ip address of 10.1.1.1 and R2 and ip
address of 10.1.1.2, ring speed 16 (that's all). Both are up/up but I'm
getting encap failed when trying to ping. I wouldn't think I need any
bridging commands at all on R1 and R2, it should be just like plugging
into a MAU.
The f'n search engine for the archives isn't working at groupstudy.com
again, 2nd day in a row (was hoping to find the answer there). Any
ideas why it wouldn't be working?
Brian
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:39 GMT-3