From: Wu Jiang (wujiang@xxxxxxxxx)
Date: Tue Feb 06 2001 - 00:46:34 GMT-3
I think it should be,
route-map default-out permit 10
set ip default next-hop X.X.X.X
Also remember policy routing is applied to inbound interfaces and it takes prec
edence over any routing protocols, static or dynamic.
HTH,
Wu
----- Original Message -----
From: "fwells12" <fwells12@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 06, 2001 8:25 AM
Subject: Distance Vector default route possibility
> I don't have time to set this lab up right now so I'll ask the question =
> before I forget:
>
> Rather than dealing with the FLSM to VLSM issues, has anyone used policy =
> routing to set a default-route for IGRP/RIP routes outbound to a VLSM =
> domain like the following theoretical route-map...
>
> interface serial 0
> ip policy route-map default-out
> !
> route-map default-out
> match ip address 0.0.0.0
> set ip next-hop X.X.X.X
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:37 GMT-3