From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Mon Feb 05 2001 - 09:08:12 GMT-3
Is there anything special that needs to be done in order to get Auto-RP to
work accross a tunnel?
R6------------R2
R6
interface tunnel 0
ip address 140.10.200.6 255.255.255.0
tunnel source int s3/0.2
tunnel destination 140.10.102.2
tunnel mode dvmrp
ip pim sparse-mode
!
ip pim send-rp-announce BVI70 scope 5
ip pim send-rp-discovery scope 5
R2
interface tunnel 0
ip addres 140.10.200.2 255.255.255.0
tunnel source int s0/0
tunnel destination 140.10.102.6
tunnel mode dvmrp
ip pim sparse-mode
I see the auto-rp mapping on other routers, just not on R2.
Thank you,
Robert
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:37 GMT-3