From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Sun Feb 04 2001 - 04:25:19 GMT-3
jamie,
Ok, did some more testing and this thing will work without a
name. I also changed the dialer idle-time-out value. The one problem I'm
seeing now is on router 2. When I pull the serial conn. from router 3 to
the frame switch the bri line kick in and passes all the routes. However
when I break the link from r2 to the frame switch, nothing..... R3 never
forms a full state with R4 and r2 and R3 doesn't pass routes even though the
bri line is up....
Any thoughts..
Nigel...
----- Original Message -----
From: Price, Jamie <JPrice@isgteam.com>
To: 'Nigel Taylor' <nigel_taylor@hotmail.com>; Cisco Group Study
<cisco@groupstudy.com>; CCIE_Lab Group Study <ccielab@groupstudy.com>
Cc: Bryant Andrews <Bryant_Andrews@hotmail.com>
Sent: Sunday, February 04, 2001 1:49 AM
Subject: RE: ISDN questions ...!
> Just an FYI/gotcha
>
> I think setting the dialer idle-timeout to 1 causes problems.
>
> We're all impatient and want the line to come down quickly so we can prove
> the solution but I've noticed that when the "dialer idle-timeout" is less
> than the "dialer wait-for-carrier-time" then behaviour that is comparable
to
> what you mention here (flapping line) occurs.
>
> Jamie
>
> -----Original Message-----
> From: Nigel Taylor [mailto:nigel_taylor@hotmail.com]
> Sent: Sunday, February 04, 2001 12:38 AM
> To: Cisco Group Study; CCIE_Lab Group Study
> Cc: Bryant Andrews
> Subject: ISDN questions ...!
>
>
> I'm working through one of the labs at fatkid(401, Advanced OSPF) and =
> have a couple of questions. The one part of the configuration I can't =
> understand is the BRI's on R2 and R3. There is no configuration for =
> the name of the calling device or called device. when I tried this the =
> routers would no connect, well at least not for more than a second. =
> "debug ppp nego" showed called from <unknown> hang-up. Most examples =
> I've worked with makes use of the name option on the "dialer map" =
> command?
>
> My other question is specific to the "dialer idle-timeout 1 either". I =
> know what the command does but with one second.
>
>
> Has anyone worked through this lab and got it working with the solution =
> on the site... What was your observations on the bri line.
> Mines keep bouncing up and down...
>
> TIA
>
> Nigel..
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:35 GMT-3